Food Line  

Conversion Chart

 

 

 

 

 

 

SIKAFLEX - 252 310ml Cartridge - Black

Structural Adhesive Sealant Polyurethane
Stock Code:
559105
$43.33 incl GST

Stock Locations

  • Ballarat:
    25 In Stock
  • Shepparton:
    Special Order
Make an Enquiry
Add to Favourites

Description

DESCRIPTION

SIKAFLEX - 252 310ml Cartridge - Black

Elastic adhesive for vehicle assembly bonding

Sikaflex®-252 is an elastic 1-component polyurethane adhesive especially designed for bonding large components in vehicle assembly. It is suitable for bonding coated metal, GRP, ceramic materials and plastics.  

  • Bonds well to a wide variety of substrates
  • Capable of withstanding high dynamic stresses
  • Good gap-filling properties

PRODUCT BENEFITS

  • Bonds well to a wide variety of substrates
  • Capable of withstanding high dynamic stresses
  • Good gap-filling properties
  • Can be painted
  • Vibration-damping
  • Electrically non-conductive

Usage

Sikaflex®-252 is suitable for assemblies that are subject to dynamic stresses. Suitable substrate materials are timber, metals, particularly aluminum (including anodized components), sheet steel (including phosphated, chromated and galvanized components), metal primers and paint coatings (2-component systems), ceramic materials and plastics. Seek manufacturer’s advice before using on plastics that are prone to stress cracking. This product is suitable for professional experienced users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.

Packaging

Cartridge

300 ml

Unipack600 ml

Product Details

Typical Product Data

Chemical base 

1-component polyurethane

 

Colour (CQP001-1) 

Black, white

 

 

 

Cure mechanism 

Moisture-curing

Density (uncured)

depending on colour

 

 

1.2 kg/l

 

 

Non-sag properties 

Good

Application temperature

ambient

10 ─ 35 °C

Skin time (CQP019-1) 

40 minutes A

Open time (CQP526-1) 

35 minutes A

 

 

Curing speed (CQP049-1) 

(see diagram 1)

 

Shore A hardness (CQP023-1 / ISO 48-4) 

50

Tensile strength (CQP036-1 / ISO 527) 

3 MPa

Elongation at break (CQP036-1 / ISO 527) 

400 %

Tear propagation resistance (CQP045-1 / ISO 34) 

7 N/mm

 

Tensile lap-shear strength (CQP046-1 / ISO 4587) 

2.5 MPa

Service temperature (CQP509-1 / CQP513-1)

 

4 hour

1 hour

 

 

 

 

 

 

-40 ─ 90 °C 

130 °C 

150 °C

 

 

 

 

 

 

Shelf life (CQP016-1) 

12 months B

 

CQP = Corporate Quality Procedure

A) 23 °C / 50 % r. h.

B) storage below 25 °C

CURE MECHANISM

Sikaflex®-252 cures by reaction with atmospheric moisture. At low temperatures the water content of the air is generally lower and the curing reaction proceeds somewhat slower.

Application

Surface preparation

Surfaces must be clean, dry and free from grease, oil, dust and contaminants.

The surface treatment depends on the specific nature of the substrates and is crucial for a long lasting bond. Suggestions for surface preparation may be found in the current edition of the appropriate Sika® Pre-treatment Chart. Consider that these suggestions are based on experience and must be verified by tests on original substrates.

CHEMICAL RESISTANCE

Sikaflex®-252 is generally resistant to fresh water, seawater, diluted acids and diluted caustic solutions; temporarily resistant to fuels, mineral oils, vegetable and animal fats and oils; not resistant to organic acids, glycolic alcohol, concentrated mineral acids and caustic solutions or solvents. 

Application

Sikaflex®-252 can be processed between 10 °C and 35 °C (climate and product) but changes in reactivity and application properties have to be considered. The optimum temperature for substrate and sealant is between 15 °C and 25 °C.

Consider that the viscosity will increase at low temperature. For easy application, condition the adhesive at ambient temperature prior to use. To ensure a uniform thickness of the bondline it is recommend to apply the adhesive in form of a triangular bead (see figure 1).

Sikaflex®-252 can be processed with manual, pneumatic or electric driven piston guns as well as pump equipment. The open time is significantly shorter in hot and humid climates. The parts must always be installed within the open time. Never join bonding parts if the adhesive has built a skin.

Tooling and finishing

Tooling and finishing must be carried out within the skin time of the product. It is recommended to use Sika® Tooling Agent N. Other finishing agents must be tested for suitability and compatibility prior to use.

Removal

Uncured Sikaflex®-252 can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin have to be washed immediately using hand wipes such as Sika® Cleaner-350H or a suitable industrial hand cleaner and water.

Do not use solvents on skin.

Still can't find what you're looking for? Our website is continuously being updated, so contact us by phone or email for anything else:

Phone:
03 5336 1111

Email:
online@iw.net.au

Details

  • Brand:
    Sikaflex