Food Line  

Conversion Chart

 

 

 

 

 

 

Hex Bolt - M6x30 Zinc Plated (Box=200)

AS1110.1 / CLASS 8.8 - M6-1.00 x 18mm
Stock Code:
BH88ZCM060030
$0.18 incl GST

Stock Locations

  • Ballarat:
    200 In Stock
  • Shepparton:
    Special Order
Make an Enquiry
Add to Favourites

Description

DESCRIPTION

Hex Bolt - M6x30 Zinc Plated (Box=200)

Hex Bolts have a hexagon head, part thread and part shank which are utilised to fasten material. They are used to fasten objects together by inserting the bolt from the one end and securing it with either a nut on the other end or into a taped hole. A nut & bolt combination compresses everything together. To tighten the nut requires a socket and wrench or a spanner, If, while tightening the nut, the bolt turns with it, a second spanner or wrench is required to hold-on to the bolt while the nut is tightened. If thread length is critical there is a cross over where a hex bolt could be fully threaded. This is due to a gradual change in the fastener industry due to wholesalers wanting to reduce their stock holdings, now they only carry the shorter lengths as fully threaded. Therefore, if thread length is critical, always check our specifications or contact us prior to ordering.

Product

HEX BOLT
 
Finish
ZINC PLATED (RoHS Compliant)
 
Zinc Plated is the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of zinc is applied by either electroplating or mechanically. It is intended to be used internally. Whilst some people use it externally it is not recommended if corrosion is a concern. If you want a fastener that will withstand the outdoor elements choose from our Stainless steel range
 
Size
M6
 
Length / Dimension
30
 
Thread
M6-1.00 x 18mm (Thread length on older stock may vary)
 
Specification
AS1110.1 / CLASS 8.8
 
QTY - Sold Individually
 
 
Click here for bolt technical specifications
 
Click here for hobson high tensile product guide
 
Click here for hobson breaking strength guide
 
Click here for high tensile & stainless steel head markings 
 
Click here for Hex Bolts tightening torque class 8.8
 
Click here for product finish comparisons
 
Click here for bolt & set screw information
 

Still can't find what you're looking for? Our website is continuously being updated, so contact us by phone or email for anything else:

Phone:
03 5336 1111

Email:
online@iw.net.au

Details

  • Thread Size:
    M6-1.00
  • Left or Right Hand:
    Right Hand
  • Material:
    Zinc Plated 8.8 Steel
  • Brand:
    Hobson
  • Metric/Imperial:
    Metric
  • Size:
    Each
  • Length:
    30 mm